Tech4o Altimeter Watch User Manual download pdf (Page 8)

7.1 Alternate Time Zone Mode - Setting

• In the alternate time zone mode, press and hold the Set/+

button [s/+] for two seconds.

• The hours will ash. Press [s/+] and [o/-] buttons to

select the

correct hour, making sure to account for a.m. A, or p.m. P.

Press

the [o/o] button to conrm.

• The minutes will ash. Press [s/+] and [o/-] buttons to select

the correct minutes. Press the [o/o] button to conrm.

• The alternate time zone is now set.

8.0 Altimeter Mode - Display

Altimeter mode provides information and trends based on the

user’s altitude relative to sea level.

• To view the altimeter, press the mode

[m] button until the mode indicator

displays A.

• In altimeter mode, the watch will display

both a 24h & 2h barometric TREND and

the current altitude on the top row, and

the current home time or temperature in the bottom row. For

more on interpreting the barometric TREND graph, please refer

to section 9: Barometer Mode.

8.1 Altimeter Mode - Setting

•

Proper calibration is important to ensure accurate altimeter

readings.

• To set a reference, press and hold the [s/+] button for 2

seconds. [Note: Reference altitude is a know value that the

watch can use as a baseline.]

• Press [s/+] and [o/-] buttons to adjust the reference altitude

to your current altitude. Refer to a local topographical map

to determine your current altitude. Press the [o/o] button to

conrm.

• The unit of measure will now ash. Press [o/-] button to switch

between feet and meters. Press the [o/o] button to conrm.

• Altimeter mode also has an optional lock feature.

• Press the [o/o] button to lock altimeter mode and prevent any

accidental recordings of changes in altitude.

1 2 3 4 5 6 7 8 9 10 11 12 13

No comments

Tech4o Altimeter Watch User Manual Page 8